Ultimate Crossing Gate & Traffic Controller – Board Only

Description

This is the ultimate in crossing signal control where the rubber meets the road on one card for no hassle wiring. No one has the features this has. This DCC compatible crossing control properly keeps the bells on during the entire transition of the gates. When a train approaches it lowers the gates and properly sequencing 4 way street lights G Y R for auto traffic to stop without people in the back seat doing kiss off the windshield and it flashes the gate signals until gates are fully up. It has dual sound card triggers to play sounds when the gates are up … like an adjacent factory, harbor, station or farm sound or your choice of bell sounds when down (check our sound library). The set up mode has a calibrate function just for sensors alignment optimization. Makes laser alignment easy. (Beat that!) It has 2 triggers if you need “turn on” arrows, “Walk-Don’t Walk” or we can program for whatever you want (call for information). Requires 5-6V DC 3 amp. 2 Input triggers are for open collectors that go to ground and can be used with our Laser SKU-25340014, IR cross track SKU-25340007 or our adjustable reflective (under track) sensors SKU-25340024 including Arduino or Adafruit products. Designed, built manufactured right here in the USA. This comes in N SKU-12250011, HO SKU-15250008, and O SKU-15250006 kits with all above and under table hardware including the laser sensor too. All you need to add is our sound card SKU33240001. See our U-Tube installation video. Lifetime warranty with free software updates.