DCC Current Sensor with 5 Volt Signal Wire
$20.00
Measure AC current in DCC feed wires for block detection. This is compatible with any of our products as well as all other products like Arduino and is suitable for different loads, including inductive load, capacitive load, resistive load testing and signaling our gate module SKU-57660003 or our sound module SKU-33240001
20 in stock
Description
Loop block feeder wire through coil.
*Length 40mmX width 38mm.
*Operating voltage: DC 5V.
*Output Signal Wire Goes to Ground
*Current detection range: AC 0-5A.
*Current trigger is adjustable to a resolution of 0.2A.
Additional information
| Weight | .5 lbs |
|---|---|
| Dimensions | 2 × 2 × 2 in |
You may also like…
-
Sound Card 2 – w/SD Card and Speaker
$40.00 Add to cart -
DCC Current Sensor 5 Volt with 10A Relay
$25.00 Add to cart -
Ultimate Crossing Gate & Traffic Controller – Board Only
$100.00 Add to cart -
DCC Current Sensor Remote Coil With 10A Relay
$25.00 Add to cart -
Sound Card 1 – Internal Memory w/ Speaker
$35.00 Add to cart
